Hello,
I trying to read A64 board bluetooth details. But when used hciconfig hci0 -a command failed to get details of class details. I need to check what is current bluetooth transmission power(dB) in classic mode and how much could that be improved through command line options.
log:
olimex@a64-olinuxino:~/RfMonNBIoT$ hciconfig hci0 -a
hci0: Type: Primary Bus: UART
BD Address: 58:B3:FC:32:2E:8A ACL MTU: 1021:8 SCO MTU: 255:16
UP RUNNING PSCAN ISCAN
RX bytes:298174 acl:2128 sco:0 events:13139 errors:0
TX bytes:2903609 acl:12583 sco:0 commands:215 errors:0
Features: 0xff 0xff 0xff 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'NBIOTRFMon0004'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x1e3e
LMP Version: 4.0 (0x6) Subversion: 0xe40e
Manufacturer: Realtek Semiconductor Corporation (93)
Name: 'NBIOTRFMon0004'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x1e3e
LMP Version: 4.0 (0x6) Subversion: 0xe40e
Manufacturer: Realtek Semiconductor Corporation (93)