HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 3.68V
5v source detected.Valid batteryvoltage detected.Booting from batteryvoltage sourHTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 3.67V
5v source detected.Valid batteryvoltage detected.Booting from batteryvoltage sourHTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 3.67V
5v source detected.Valid batteryvoltage detected.Booting from batteryvoltage sour
On Every RESET above message appears on terminal.
Some body tell me why not booting my board properly.
Are battery booting mode can bypass ?
Regards,
Pramod Kumar
Hi
witch Olimex do u using? I solved this problem in micro.
Quote from: Pramod Kumar on January 14, 2013, 07:40:28 AM
HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 3.68V
5v source detected.Valid batteryvoltage detected.Booting from batteryvoltage sour
Do you have any ROM error message at this point?
If just hang, probably code from SD card is corrupted. Try with another card.
Quote
Are battery booting mode can bypass ?
No, that is part of boot process determined with bootlets or u-boot bootloader.