Hi,
I tested on my A20 Olinuxino micro rev E, the DDR3 performance.
I use the test describe at :
- http://linux-sunxi.org/A10_DRAM_Controller_Calibration (http://linux-sunxi.org/A10_DRAM_Controller_Calibration)
- http://linux-sunxi.org/A10_DRAM_Controller_Calibration_(impedance_configuration_example)#Searching_for_optimal_.22dram_emr1.22 (http://linux-sunxi.org/A10_DRAM_Controller_Calibration_(impedance_configuration_example)#Searching_for_optimal_.22dram_emr1.22)
But I never had some data that will proche of the test upper. My result of this test is completely red (no data can be calculate)
Somme body have use this type of test?
Am I do something wrong in the test protocole?
Thank for your response
Philippe
Might make more sense to ask on a linux-sunxi place.
I expect Olimex already set the values to ones known to work, however.
John
Thank for you reply.
I will ask on sunxi-linux
Philippe