Hi,
I am trying to connect my Windows PC with iMX53 qsb via ARM-USB-OCD-H and openOCD. I am following the manual https://www.olimex.com/Products/ARM/JTAG/_resources/ARM-USB-OCD_and_OCD_H_manual.pdf exactly, downloading the executable for windows, using Zadig for the drivers.
After that, i try to connect to the board using,
openocd.exe -f interface/ftdi/olimex-arm-usb-ocd-h.cfg -f board/imx53loco.cfg
However, the openOCD just stop there with logs like,
Open On-Chip Debugger 0.9.0-rc1 (2015-04-24-22:05)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
Warn : imx53.SDMA: nonstandard IR value
iMX53 Loco board lodaded.
adapter speed: 3000 kHz
RCLK - adaptive
DCD
Info : RCLK (adaptive clock speed)
I don't know what happens, it seems that i just failed to connect to the board. Is there anyone kindly know what's going on?
Appreciate for any discussion and help!
Best Regards,
Zhenyu
Best thing is to get a -d3 log and then report to oocd mailing list. They're usually very helpful.
John
Quote from: JohnS on October 12, 2017, 01:40:19 PM
Best thing is to get a -d3 log and then report to oocd mailing list. They're usually very helpful.
John
Thanks for your advise, John. I will send my issue with d3 log to the mailing list.
Best,
Zhenyu