Hi to all!
I have purchased mod-io2 and mod-rs232.
I would understand how to use mod-rs232 as host for the communication between PC and mod-io2.
I have connected mod-io2 and mod-rs232 with uext cable, pc to mod-rs232 with serial cable, but serial communication from pc not working.
Actually I need to send i2c bytes from PC to mod-io2 via serial com to enable/disable relays and read input.
I hope you reply me asap because it's really urgent.
Thank you in advance for your support
Hello,
This is not possible :-\. MOD-IO2 uses I2C interface for communication with another board. You can't send commands to MOD-IO2 via serial port, only via I2C. MOD-RS232 uses UART (data serial) interface for communication with another board. The two boards are not compatible with each other.
MOD-IO2 is meant to be used with a board that has at least one free and available I2C interface. Like OLIMEXINO-328, Arduino UNO or similar. Then you establish connection between MOD-IO2 and the main board via I2C. Then you connect the main board to a computer and communicate with the MOD-IO2 via the main board. There is an Arduino IDE library for MOD-IO2 and OLIMEXINO-328 available here: https://www.olimex.com/Products/Modules/IO/MOD-IO2/resources/OLIMEXINO-328+MOD-IO2.zip
Best regards,
Lub/OLIMEX