Olimex Support Forum

Microcontrollers => ESP8266 => Topic started by: edup on December 09, 2016, 05:19:04 PM

Title: MOD-MPU6050 Desactivation
Post by: edup on December 09, 2016, 05:19:04 PM
Hi Guys,

In the arduino example given by olimex shows how to activate/enable the MPU6050 module but doesn't show how to disable/sleep/turn off it.

I google it but couldn't find an answer. Do you have any tip on how to do it? I want to activate/desactivate it remotely in runtime so I just need the function of how to do deactivate the module.

Thanks in advance.

Best
Title: Re: MOD-MPU6050 Desactivation
Post by: LubOlimex on December 20, 2016, 02:31:16 PM
What is your main board that you use with the module? Some boards have control over the 3.3V output, like our OLIMEXINO-32U4. If that is the case you can just shut down the 3.3V line of the module at some conditions.

Best regards,
Lub/OLIMEX