Hello.
We want to test the Olinuxino for some Zigbee communication.
We have a MOD-ZIGBEE-UEXT and a MOD-ZIGBEE-PIR.
When connected to the UEXT of the Olinuxino (iMX233 Maxi), with the "MOD-ZIGBEE-PIR" we see the "Trying to join network as a new device..." messages, but we get nothing from the MOD-ZIGBEE-UEXT...
So the questions are:
- What firmware is preloaded in these "MOD-ZIGBEE-UEXT" boards?
- Can they act as Zigbee coordinators or do they have to be reprogramed for that? (we just want to get some data from the MOD-ZIGBEE-PIR devices)
Thanks in advance!
Hey uantero,
All ZIGBEE modules are programmed as end devices before shipping.
You need to program at least one as a coordinator. You may use the prebuilt hex from the following archive: https://www.olimex.com/Products/Modules/RF/MOD-ZIGBEE-UEXT/resources/DemoSoft_MOD-ZIGBEE_v.1.00_11.05.2011.zip (https://www.olimex.com/Products/Modules/RF/MOD-ZIGBEE-UEXT/resources/DemoSoft_MOD-ZIGBEE_v.1.00_11.05.2011.zip).
Best regards,
Lub/OLIMEX