Text only | Text with Images

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A10 => Topic started by: dmsherazi on January 11, 2016, 08:23:07 PM

Title: Can I connect MOD-RTL8188CU to the USB Port 0 (one used for OTG) in olixuino
Post by: dmsherazi on January 11, 2016, 08:23:07 PM
Can I connect RTL8188CU to the USB port 0  (the one used for OTG) of an A10. I would be connecting it on board UDP0 and UDM0 connecting to the module. Is this OK?

Title: Re: Can I connect MOD-RTL8188CU to the USB Port 0 (one used for OTG) in olixuino
Post by: dmsherazi on January 13, 2016, 06:27:52 PM
OK Guys, I got the answer we need to modify fex file to make USB OTG as a USB HOST.

Locate the USB 0 section of fex file and change the usb_type to 1.
Text only | Text with Images