Print Page - A13 is not turned on

Title: A13 is not turned on
Post by: Ted87 on October 22, 2015, 08:24:31 PM

I bought A13 and brought it home. I inserted SD card with debian. I connected monitor. After that I connected the keyboard to usb. After that I connected power supply 6V and 1A plus inside, minus outside. After that I pressed pwd button near power supply connection. And nothing. Only red LED is on. That's all. Monitor doesn't show that there is something. What do I do wrong?

Title: Re: A13 is not turned on
Post by: Gerrit on October 22, 2015, 08:49:20 PM

6 volts is maybe to low try 9 or 12 volt

Title: Re: A13 is not turned on
Post by: Ted87 on October 22, 2015, 08:55:08 PM

Thank you for your time. But the adapter is 1A so will be it ok 1A and 9V?

Title: Re: A13 is not turned on
Post by: Ted87 on October 22, 2015, 09:10:45 PM

I tried 9 and 12V the result is the same.

Title: Re: A13 is not turned on
Post by: JohnS on October 23, 2015, 12:58:27 AM

Which A13? Wrong voltage for some... which will cause damage.

Not enough current for others.

Usually (always?) the user manual tells you what you must do.

John

Title: Re: A13 is not turned on
Post by: Ted87 on October 23, 2015, 06:36:34 AM

A13 Olenuxino. I tried with different power supply - result is the same. I've read all user manual. There is no step step what to do to turn it on.

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A13 => Topic started by: Ted87 on October 22, 2015, 08:24:31 PM