On page 9 of the manual for STM32-P107 (the schematic page) labels of the STM32F107 chip pins on the right side appear to be aligned in a wrong direction and overlap with other markings which makes them hard to read. Could anything be done about that?
Hey,
I suggest that you take a look at the stand-alone schematics: https://www.olimex.com/Products/ARM/ST/STM32-P107/resources/STM32-P107_board_revision_C.pdf (https://www.olimex.com/Products/ARM/ST/STM32-P107/resources/STM32-P107_board_revision_C.pdf)
The origins of the labels in Eagle are improperly placed (some origins of the labels are rotated so that the origin is behind the label). The problem appears when you attempt to export the image in a format suitable for embedding in text documents.
Best regards,
Lub/OLIMEX
That is a lot better. Thanks!