Print Page - same SD card works with A10-lime but not with A10-limeNAND

Title: same SD card works with A10-lime but not with A10-limeNAND
Post by: albvalente on May 05, 2015, 06:42:23 PM

Hi, same SD card boots correctly inside a A10 lime without NAND but if I put it inside a A10 with NAND, nothing shows on the screen.
A10-lime with NAND is not dead because I can boot it in Android without SD inserted.

Any clue?

thank you

Title: Re: same SD card works with A10-lime but not with A10-limeNAND
Post by: JohnS on May 05, 2015, 10:28:23 PM

Connect to debug uart and see what is happening during attempted boot.

John

Title: Re: same SD card works with A10-lime but not with A10-limeNAND
Post by: albvalente on May 07, 2015, 11:09:00 AM

thank you John
stupid me!
It starts and auto logins correctly
I was expecting X on the connected screen but I just had to enter via serial, dhcp eth0, ./change_display..
and everything worked fine
Strange it started and showed X on a A20 just out of the box..

now I'm going to iron brand RTFM on my left arms.. just in case ;)

thank you
have a nice day

Title: Re: same SD card works with A10-lime but not with A10-limeNAND
Post by: JohnS on May 07, 2015, 12:38:53 PM

hey, no worries! I'm glad to hear you have it working :)

John

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A10 => Topic started by: albvalente on May 05, 2015, 06:42:23 PM