Hello.
I want to connect a 3.5" lcd touchscreen on my olinuxino A10 board.
What kind of display is compatible with A10.(i'm not speaking of the connector).
RGB lcd screen 24 bits or others?
Same question for touchscreen.
What kind of capacitive or resistive touch lcd are compatible.
Simple 4 wire are ok?
These one are ok?
http://szboxing.en.made-in-china.com/product/lSzQYkudYihE/China-3-5-Inch-Touch-Screen-with-Capacitive-Touch-Panel.html
http://hnlcds.en.made-in-china.com/product/LKrQZkUAXDWO/China-TFT-3-5-Inch-with-Tp-LCD-Display.html
http://huayuan-lcd.en.made-in-china.com/product/gvVndMFUflWP/China-3-5-Inch-TFT-Module-LCD.html
Thank you
Why not try the Newhaven Display one?
It costs more that those Chinese ones but you get all the data and good support.
http://www.newhavendisplay.com/nhd35320240mfatxlctp1-p-5204.html
This has a standard FT5206 touch controller so drivers available for Android and Linux.
CubieScreen 3.5″ TFT(800 x 480) with touchscreen for cubieboard1 or cubieboard 2.
http://ybmaker.org/
Thanx for answer.
Dave, how did you know newshaven's display is compatible?
Lcd connexion are ok?
Did you try that?
http://www.newhavendisplay.com/nhd35320240mfatxlctp1-p-5204.html
I use the 5" and 7" models and they have the same interface.
I recently got the 7" working with an A20 running Android.