Text only | Text with Images

Olimex Support Forum

DUINO => MAPLE => Topic started by: psykokwak on January 28, 2015, 05:21:53 PM

Title: Olimexino STM32 : Flashing directly from software
Post by: psykokwak on January 28, 2015, 05:21:53 PM
Hi,
I use that board for remote devices and I communicate with them with an USART port!
Each time I would like to reflash the board, I have to use an USB cable with MapleIDE.
Is there an other way to reflash the board without physical manipulation ? Directly from the software for example ?

Thanks for your help.
Title: Re: Olimexino STM32 : Flashing directly from software
Post by: JohnS on January 28, 2015, 08:14:48 PM
ST cover this in detail with samples, app notes, etc.  What was wrong with all they provide?

John
Title: Re: Olimexino STM32 : Flashing directly from software
Post by: psykokwak on January 29, 2015, 10:52:57 AM
Hi, Thanks for your answer!
I did not think to look :-[
Do you have a link to give me ? (I'm not familiar with this kind of technology)
Title: Re: Olimexino STM32 : Flashing directly from software
Post by: JohnS on January 29, 2015, 11:35:30 AM
Try
http://lmgtfy.com/?q=stm32+self+programming

John
Text only | Text with Images