Print Page - Can't get a10_Lime_debian_3.4.90_release

Title: Can't get a10_Lime_debian_3.4.90_release_3.img to work
Post by: rmcs on July 09, 2014, 11:26:12 AM

Hi all,

So far I have been using "a10_Lime_debian_second_release.img" on my Olimex A10 which works fine but I can't get the latest image to work:

a10_Lime_debian_3.4.90_release_3.img

I copied both the same way to my microsd card:

dd if=a10_Lime_debian_second_release.img of=/dev/sdi
sudo dd if=a10_Lime_debian_3.4.90_release_3.img of=/dev/sdi

Is the 3.4.90 image not ready to go?

Title: Re: Can't get a10_Lime_debian_3.4.90_release_3.img to work
Post by: ar on August 10, 2014, 08:18:22 PM

I have problems also. the fat16 partition is corrupt. gparted check complains. I can post the log but if you check for your selfs you [edit] might see the problem.

md5sum of image not 7z archive!:
2a7654ac7b8d765ff42bde081f70d846 ./a10_Lime_debian_3.4.90_release_3.img

Title: Re: Can't get a10_Lime_debian_3.4.90_release_3.img to work
Post by: otyugh on August 11, 2014, 01:40:32 PM

Same signature, same problem. Can't connect it through ssh.

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A10 => Topic started by: rmcs on July 09, 2014, 11:26:12 AM