Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: netem on July 01, 2014, 07:12:52 AM

Title: Allwinner A20 application note/guidelines
Post by: netem on July 01, 2014, 07:12:52 AM
Are there any all winner application notes available for pull-up/pulldown or other electrical guidelines ? I wanted to remove some components from the A20 design which are not needed for my application.
Title: Re: Allwinner A20 application note/guidelines
Post by: JohnS on July 01, 2014, 09:10:54 AM
I believe not, unless it's in the doc already on web sites.  Some/most/all of those are Chinese.

John
Title: Re: Allwinner A20 application note/guidelines
Post by: jlucius on July 01, 2014, 09:58:31 AM
There are some docs for the A20 in the git:

https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/A20-PDFs
Title: Re: Allwinner A20 application note/guidelines
Post by: markus2330 on July 27, 2022, 05:30:05 PM
The folder with its content was removed in aa007a3f78cf2b1c0c60b91643b5833cee129321

It is still available in https://github.com/OLIMEX/OLINUXINO/tree/443bd2a05893d061708c4b045b72a97805280a72/HARDWARE/A20-PDFs

"pull" is mentioned in two documents:
- A20 Datasheet v1.0 20130227.pdf
- A20 User Manual 2013-03-22.pdf

But I did not find much about electrical guidelines, only that the internal resistor of the boot select pin is 50K and that RIRQ has a programmable pull-up resistor of 6~96 kΩ (default 48kΩ).