Olimex Support Forum

ARM => ST => Topic started by: msr on June 25, 2014, 01:49:16 AM

Title: STM32 P107 pinout (proto area)
Post by: msr on June 25, 2014, 01:49:16 AM
Hi,

Where can I get a description of the pins exposed on the proto area of STM32 P107 board?

The pins exposed on the first column (most left) are identified by the silk screen but the second column's silkscreen is not readable and I can't find any info in the STM32 P107 manual.
Title: Re: STM32 P107 pinout (proto area)
Post by: JohnS on June 25, 2014, 04:38:42 PM
Try the schematic.  Either side of cpu chip are vertical columns of pins.

John
Title: Re: STM32 P107 pinout (proto area)
Post by: msr on July 06, 2014, 01:51:08 AM
I forgot to mention board's revision. It's Rev C and it's impossible to associate the schematic to the pins exposed on the proto area. Please provide that info, a table would be OK.
Title: Re: STM32 P107 pinout (proto area)
Post by: JohnS on July 12, 2014, 06:23:35 PM
See my previous reply.

You don't appear to be looking properly.

John
Title: Re: STM32 P107 pinout (proto area)
Post by: aes on November 26, 2014, 03:32:19 PM
Hi, I'm not able to figure this our either.

I dont see how either side of the CPU on the schematic should correspond to pinout on the proto area. On the schematic the left side is the ports PE1-PE14, but on the(vissible part) of the silk screen PE ports are interleaved into PA and PC pins.
Title: Re: STM32 P107 pinout (proto area)
Post by: JohnS on November 26, 2014, 06:31:11 PM
I give in.  I see pins you don't.  Pass.

John
Title: Re: STM32 P107 pinout (proto area)
Post by: aes on November 28, 2014, 11:31:11 AM
Ok, this is how my board looks. https://drive.google.com/file/d/0B9isSqSjcKNSX1A4R1pKTzdoTm8/view?usp=sharing (https://drive.google.com/file/d/0B9isSqSjcKNSX1A4R1pKTzdoTm8/view?usp=sharing). My question is, what should the labels in the second column on the proto area be?

Could you possibly share the silk screen file?

/Anders
Title: Re: STM32 P107 pinout (proto area)
Post by: JohnS on November 29, 2014, 02:47:51 PM
New idea: use a meter to figure out what connects where.

John
Title: Re: STM32 P107 pinout (proto area)
Post by: aftab_s81 on December 09, 2014, 02:55:45 PM
While using pins on proto area of STM32-P107, be careful. E.g, PB5 is actually PB6 while PB6 is actually PB7 on microcontroller.
Title: Re: STM32 P107 pinout (proto area)
Post by: LubOlimex on September 18, 2015, 12:04:14 PM
Thank you for the input, guys!

The protopads are now shown in the STM32-P107's user's manual on page 19.

Also take a look here:

(http://i.imgur.com/ARYCd9x.png)

Best regards,
Lub/OLIMEX