Hi, so I recently got my LIME to play around with, and I've been having troubles with hooking it up to two separate HDTVs (one is a Samsung, one is an Emerson). When I connect the HDMI and give it power, the red power LED comes on and the screen on the TV stays blank for a while. Eventually (with the stock image) a message pops up (from the tv) saying "Format Not Supported".
I've tried this on two different LIME boards and two different TVs. If I try and modify any of the display settings in the script_a10_lime_HDMI.fex file (on the first partition of the sd card), the uEnv.txt file, or the boot.scr file (using uboot-tools, mkimage), the screen just does nothing, and there is no signal.
I have no idea what is going on.
To recap:
- With two different LIME boards and two different HDTVs, I cannot get HDMI working properly
- With the stock image, both tvs display the error message: "Format Not Supported"
- If I change any settings in script_a10_lime_HDMI.fex, uEnv.txt, or boot.scr, the screen stays blank
- The cards are 8GB class 10
Thanks in advance for any help.