Print Page - A10-OLinuXino-LIME .brd .sch files open in?

Title: A10-OLinuXino-LIME .brd .sch files open in?
Post by: 3BABY on February 15, 2014, 02:41:10 AM

Hi Guys,

i have got what i believe the .brd .pro and .sch hfiles for the A10-OLinuXino-LIME from:

https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/A10-OLinuXino-LIME/A10_OLinuXino_Lime_Rev-B_SHIELD_TEMPLATE%20KiCAD

but when trying to open these files in KiCAD i get errors and cant see the schematic or board.. are these files for kiCAD? im using build 2013-07-07

or maby im not downloading them correctly? i cant see a "download" button on github.. sorry about this amature question

any help would be much appricated.

Title: Re: A10-OLinuXino-LIME .brd .sch files open in?
Post by: olimex on February 15, 2014, 09:47:35 AM

what error you get?

Title: Re: A10-OLinuXino-LIME .brd .sch files open in?
Post by: 3BABY on February 15, 2014, 10:54:15 AM

Hi,

i get these errors (below) when opening A10_OLinuXino_Lime_Rev-B_SHIELD_TEMPLATE.kicad_pcb the file i have is 291KB is that the correct size? as i think i may have not downloaded it corectly from github and it may be corrupt?

https://imageshack.com/i/nh5sw5p

https://imageshack.com/i/ng9dxxp

Title: Re: A10-OLinuXino-LIME .brd .sch files open in?
Post by: 3BABY on February 15, 2014, 11:08:56 AM

ok so seems like i didnt have the correct size file, i have since downloaded the file at 105KB for the template..

however.. this is the template for the Lime is there any actual board files with traces etc on Github or around for the A10 OLinuXino Lime Rev-B ?

regards :-)

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A10 => Topic started by: 3BABY on February 15, 2014, 02:41:10 AM