Olimex Support Forum

ARM => NXP => Topic started by: collansj on January 30, 2014, 11:21:17 PM

Title: LPC-P1114 NXP prototype board
Post by: collansj on January 30, 2014, 11:21:17 PM
Do the LPC1114 have SPI agent firmware install on this prototype board
Thanks
Title: Re: LPC-P1114 NXP prototype board
Post by: LubOlimex on February 04, 2014, 02:00:55 PM
Hello there,

I am not sure I understand the question properly but the things I can say for the SPI on the OLIMEX LPC-P1114 are:

1. The LPC1114/301 used in the LPC-P1114 has two SPI interfaces with SSP features,
2. There is no ready SPI example in the demo package provided and tested by Olimex
3. Such demo examples for LPC1114 might be found in the default examples in both IAR EW and Keil uVision

Best regards,
Lub/OLIMEX