Print Page - which rev, which power connector

Title: which rev, which power connector
Post by: BJFreeman on November 01, 2012, 02:41:51 PM

OLIMEXINO-STM32 had a power plug on it the ones i got now have a terninal screws, rev D says you putting back the power plug. which board rev has the terminal screws

Title: Re: which rev, which power connector
Post by: LubOlimex on November 01, 2012, 03:12:00 PM

Hey Freeman,

Revision A and revision B had power jack. Revision C has terminal screws. Revision D will have power jack again.

If you order online you can write to the contact e-mail that you would wish your order (including your order number for easier match)to receive exactly board with terminal screws. For the moment we have at stock revision C boards.

Regards,
Lub

Title: Re: which rev, which power connector
Post by: BJFreeman on November 01, 2012, 07:06:13 PM

Thanks I am planning production on the Rev C.
I estimate about 100 to start, max about 2000 through 2013
sure wish you had paypal so I could buy directly.
will check with mouser, who I order through, to see ther mix and what it would take to get just Rev C

Title: Re: which rev, which power connector
Post by: olimex on November 01, 2012, 07:39:22 PM

just to clarify that we accept paypal payments

Title: Re: which rev, which power connector
Post by: BJFreeman on November 11, 2012, 10:09:51 PM

I solved my problem.
I found power plugs with screw terminal.
so if I get a board with power socket, I just use one of them.

Olimex Support Forum

DUINO => MAPLE => Topic started by: BJFreeman on November 01, 2012, 02:41:51 PM