Hello,
I have a ARM-USB-OCD and a SAM7-EX256 board.
The board is powered via USB and the ARM-USB-OCD driver has been installed as stated in the site.
The OlimexODS version 9.0 - rev.K with OpenOCD version 0.6.1.
I am having the following issue with openOCD:
(http://postimg.org/image/cma6z6xql/)
The debug session is unable to start.
Command used:
openocd-0.6.1.exe -f ../scripts/interface/olimex-arm-usb-ocd.cfg -f ../scripts/target/sam7x256.cfg
Kindly help me out with this.
Warm Regards,
Boseji