Text only | Text with Images

Olimex Support Forum

Microcontrollers => AVR => Topic started by: biba on July 03, 2013, 10:27:06 PM

Title: AVR-ISP-MKII & AVRDUDE
Post by: biba on July 03, 2013, 10:27:06 PM
Hi,

I updated the device this way:

Code Select
# dfu-programmer at90usb162 flash libUSB-AVRISP-MKII.hex
Validating...
10288 bytes used (83.72%)

unplug & plug

Code Select
usb 3-3: USB disconnect, device number 16
usb 3-3: new full-speed USB device number 17 using ohci_hcd

Now there is a red/orange LED. But nothing work  :-[

How can I verify if the update is successfull ?

Text only | Text with Images