Hi,
I have an I2S A20-Lime2-e16Gs16M board and a Lime2-Shield. I connected a headset to audio out and the sound is mono. Running amixer command I got the below output - Power Amplifier is Mono.
Simple mixer control 'Power Amplifier',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 63
Mono: 63 [100%] [0.00dB]
Simple mixer control 'Power Amplifier DAC',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Power Amplifier Mixer',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Power Amplifier Mute',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Please let me know how I can get stereo sound on line out.
I need a stereo sound output with volume playback control.
Thank you!
I tested this report but stereo seems to work fine by default. I used the same hardware setup and default base image. I used headphones. Only ran:
apt update
apt dist-upgrade
u-boot-install
Didn't change anything else in alsamixer, nor anywhere else.
I used this wav file:
wget https://ftp.olimex.com/Lub-clients/file_example_WAV_10MG.wav --no-check-certificate
and played it with:
aplay file_example_WAV_10MG.wav
Please try the same and report back. If you need re-write the card with latest Olimage Linux base image.
Can you send me a picture of the audio jack of your headphones? Maybe it is incompatible with our jack?
Hi LubOlimex,
Thank you so much for your help, I performed all commands and the test you recommended and I confirm now the sound is stereo!
Best regards!