Hi,
(https://olimex.files.wordpress.com/2021/04/stmp157-olinuxino-lime2-ind.jpg)
I am newbie to olimex linux boards. I flashed STM32MP1-OLinuXino-LIME-bullseye-base-20220928-143706.img available at https://images.olimex.com/release/stm32-lime/ (https://images.olimex.com/release/stm32-lime/) to STMP157-OLinuXino-LIME2-IND board and tried to check internet connection with ping command, it is showing as below.
root@stm32mp1-olinuxino-lime:~# ping www.google.com
ping: www.google.com: Name or service not known
Then, I used dhclient command as mentioned in olimage guide doc. After running dhclient command, the console is as below.
root@stm32mp1-olinuxino-lime:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 30:1f:9a:d1:3a:8c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 57 base 0xa000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 56 bytes 5294 (5.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 56 bytes 5294 (5.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
root@stm32mp1-olinuxino-lime:~# dhclient eth0
root@stm32mp1-olinuxino-lime:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 30:1f:9a:d1:3a:8c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 57 base 0xa000
eth0:avahi: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 169.254.10.235 netmask 255.255.0.0 broadcast 169.254.255.255
ether 30:1f:9a:d1:3a:8c txqueuelen 1000 (Ethernet)
device interrupt 57 base 0xa000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 123 bytes 10697 (10.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 123 bytes 10697 (10.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
root@stm32mp1-olinuxino-lime:~# ping www.google.com
ping: www.google.com: Name or service not known
When I connect same ethernet cable to my PC, I am getting internet and failing with olimex board.
Please help me to fix the issue. Thank you.
Do a software reboot first, then try
dhclient eth0
Hi,
Thanks for your reply. The issue is with ethernet cable. I tried with different cables and finally working with one. Now the same cable when I connect to my PC, no internet.
Any how, olimex board got internet and I am able to install packages.