Print Page - Armbian Image not booting form eMMC (Board- T2-SOM-e8Gs16M-IND)

Title: Armbian Image not booting form eMMC (Board- T2-SOM-e8Gs16M-IND)
Post by: Vicky on July 29, 2019, 12:24:39 PM

Hi,

Currently, I am using latest mainline image : Armbian_5.89.1_Olinuxino-a20_Ubuntu_bionic_next_5.1.12_desktop on SD card. It is booting perfectly.

but, I want to use inbuilt eMMC, for that I followed the Olimex's article Armbian How to and https://docs.armbian.com/.

In article I followed following steps,
1.nand-sata-install
2.boot from eMMC, system on eMMC
3.ext4
4.poweroff
5.Removed SD card from board
6.poweron

after poweron i am facing issues with eMMC it is not booting. Kindly suggest solution for this

Title: Re: Armbian Image not booting form eMMC (Board- T2-SOM-IND)
Post by: LubOlimex on July 29, 2019, 01:38:30 PM

Do you have T2-SOM-IND or T2-SOM-e8Gs16M-IND?

Title: Re: Armbian Image not booting form eMMC (Board- T2-SOM-IND)
Post by: Vicky on July 30, 2019, 06:30:00 AM

Quote from: LubOlimex on July 29, 2019, 01:38:30 PM
Do you have T2-SOM-IND or T2-SOM-e8Gs16M-IND?

It is T2-SOM-e8Gs16M-IND.

I apologize for wrong information .

Title: Re: Armbian Image not booting form eMMC (Board- T2-SOM-e8Gs16M-IND)
Post by: LubOlimex on July 30, 2019, 03:21:05 PM

In the menu of nand-sata-install you need to use:

5. Boot from SPI - system on eMMC

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: Vicky on July 29, 2019, 12:24:39 PM