hi
i try to compile the 3.4.104+ available on linux sunxi git depot (i use the 3.4.103 without problem) i import the config and compile without any modification, but when i try to boot but it doesn't works it's stucked by wiating root partition
any idea ?
best regards
<6> #0: sunxi-CODEC Audio Codec
[ 4.458296] #0: sunxi-CODEC Audio Codec
<6>Waiting for root device /dev/mmcblk0p2...
[ 4.484752] Waiting for root device /dev/mmcblk0p2...
<3>[mmc-err] update clock timeout, fatal error
[ 5.034494] [mmc-err] update clock timeout, fatal error
<3>[mmc-err] update clock timeout, fatal error
[ 6.034467] [mmc-err] update clock timeout, fatal error
<3>mmc0: error -123 whilst initialising SD card
[ 6.094585] mmc0: error -123 whilst initialising SD card
<6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm OD pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 6.108314] [mmc-msg] sdc0 set ios: clk 50000000Hz bm OD pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 6.138728] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 power off
[ 6.150307] [mmc-msg] sdc0 power off
<3>[mmc-err] update clock timeout, fatal error
[ 7.154478] [mmc-err] update clock timeout, fatal error