I just received a 85BC and tested power consumption with power from a LiPo Battery.
Even in SLEEP_MODE_PWR_DOWN it doesn't go below 0,5mA, I expected it to be much less.
No LEDs are on.
What could be the problem? Is the charging circuit drawing any current?
My multimeter measures currents of 0,01mA without problems, I tested it with some resistors.
I tried now with a Olimexino 85
After removing the PWR-LED, current goes down to 0,05mA. With power LED, it stays at 1mA.
That's not what I expected from Ultra-Low-Power...