Print Page - A20Micro very slow work with USB-SERIAL-CABLE-F

Title: A20Micro very slow work with USB-SERIAL-CABLE-F
Post by: ROM on January 18, 2016, 10:10:09 AM

Hello!

I plugged the card through a USB-SERIAL-CABLE-F and minicom. After loading is not responding to keystrokes. After some time, it can lead to the console everything that I typed earlier. In very rare cases, it works well.

Connection settings: 115200 8N1.

Tell me, please, why can this be?

Title: Re: A20Micro very slow work with USB-SERIAL-CABLE-F
Post by: no-juraj on January 18, 2016, 12:32:41 PM

Hello, can you please check what Kind of chip is inside this cable?

Title: Re: A20Micro very slow work with USB-SERIAL-CABLE-F
Post by: ROM on January 18, 2016, 02:23:36 PM

[171339.669768] usb 3-1: new full-speed USB device number 9 using xhci_hcd
[171339.686437] usb 3-1: New USB device found, idVendor=067b, idProduct=2303
[171339.686443] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[171339.686468] usb 3-1: Product: USB-Serial Controller
[171339.686472] usb 3-1: Manufacturer: Prolific Technology Inc.
[171339.686893] pl2303 3-1:1.0: pl2303 converter detected
[171339.687700] usb 3-1: pl2303 converter now attached to ttyUSB0

Title: Re: A20Micro very slow work with USB-SERIAL-CABLE-F
Post by: Gerrit on January 18, 2016, 02:29:53 PM

make sure that the minicom setting "Hardware Flow Control" = No

Title: Re: A20Micro very slow work with USB-SERIAL-CABLE-F
Post by: ROM on January 18, 2016, 08:54:15 PM

Thank You!
It works!

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: ROM on January 18, 2016, 10:10:09 AM