Print Page - Olimexino 85 / USB Debugging

Title: Olimexino 85 / USB Debugging
Post by: jwerner on November 11, 2014, 10:51:02 AM

Hello,

would it be possible to use the Digispark Simple USB Library http://digistump.com/wiki/digispark/tutorials/digiusb (http://digistump.com/wiki/digispark/tutorials/digiusb) or the USB Keyboard Libray http://digistump.com/wiki/digispark/tutorials/digikeyboard (http://digistump.com/wiki/digispark/tutorials/digikeyboard)?

I tried briefly but during compilation there is an error regarding USB clock rate.

Thanks in advance.

Title: Re: Olimexino 85 / USB Debugging
Post by: lorigio on January 17, 2015, 04:41:18 PM

Hi, i need this too.
I have this error
USB_CFG_CLOCK_KHZ is not one of the supported non-crc-rates!
Any way to get it working at 8mhz? or the only solution is a rs232?

Title: Re: Olimexino 85 / USB Debugging
Post by: LubOlimex on February 02, 2015, 11:48:03 AM

Hey guys,

If the problem is in the compilation of the projects you mentioned, I recommend you to report to Digistump's forums. Also please make sure that you running the latest DigistumpArduino IDE (version 1.5.8C at the time of posting).

Best regards,
Lub/OLIMEX

Olimex Support Forum

DUINO => ARDUINO => Topic started by: jwerner on November 11, 2014, 10:51:02 AM