Print Page - 32U4 and uext zigbee power problem

Title: 32U4 and uext zigbee power problem
Post by: c_arm on September 11, 2014, 12:33:04 PM

Hi guys,
32U4 board doesn't provide enough current to power uext zigbee module.
When try to power up the board with zigbee attached to uext bus, the voltage drop down to 1.5volts.
Somebody have experienced this problem before ???

Thanks

Title: Re: 32U4 and uext zigbee power problem
Post by: Lurch on September 11, 2014, 06:02:28 PM

Are you sure you are driving D8 as OUTPUT high? Otherwise the 3,3V power on UEXT is turned off.

Olimex Support Forum

DUINO => ARDUINO => Topic started by: c_arm on September 11, 2014, 12:33:04 PM