Print Page - making image when booting

Title: making image when booting
Post by: RFranta on April 07, 2014, 11:33:18 PM

Hello,

on a13 there was a Linux penguin when booting, but on A20 it's just a blank window.
I would like to put some nice image here again. Can somebody help me and tell me how to do it please?

RFranta

Title: Re: making image when booting
Post by: MBR on April 08, 2014, 01:41:46 AM

The kernel for A20 may be compiled without the bootup logo support. Look for file /proc/config.gz and search it for symbol LOGO_LINUX_CLUT224 (or just anything begining with LOGO).

Title: Re: making image when booting
Post by: RFranta on April 08, 2014, 09:43:42 AM

I found this:
CONFIG_LOGO_LINUX_CLUT224=y

Title: Re: making image when booting
Post by: MBR on April 08, 2014, 11:29:34 PM

If the logo support is compiled, the problem may be in configuration of video output - the penguin may be displayed, but not on the current display.

Title: Re: making image when booting
Post by: dave-at-axon on April 09, 2014, 05:01:40 AM

Are you using HDMI or LCD?

I am running Android with the A20 and the HDMI output does not appear until the Android desktop appears. During boot, only the LCD shows the 2 boot logos.

Title: Re: making image when booting
Post by: RFranta on April 09, 2014, 08:00:27 AM

I have LCD and nothing apperars until desktop too..

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: RFranta on April 07, 2014, 11:33:18 PM