Hi guys,
I have just received a olimex RS232 adapter that connects to the UEXT1 or UEXT2 port.
I need to switch DTR and RTS ports from a software running under the ULTIMATE distro of Debian.
I measured the voltage at the ports of the rs232 plug and only one port displays a voltage of -5.7 V.
All the others are 0 V.
It seems that the rs232 adapter is not switched on by the hardware.
Is there a specific config file where I can instruct the system to activate the UEXT2 port on which the adapter is connected ?
OK never mind, I just had a look at the schematics of the MOD-RS232, everything is clear !
there is no DTR and RTS output as it is not supposed to give some...
OK... :-X