Print Page - vga monitor on A20

Title: vga monitor on A20
Post by: gerard simonet on October 03, 2013, 09:45:11 AM

I want to connect a vga monitor using the 6 pins connector on the board .Is there a cable to do that ????

thanks all

Title: Re: vga monitor on A20
Post by: olimex on October 03, 2013, 10:44:36 AM

yes, there is and it will be updated on our web today

Title: Re: vga monitor on A20
Post by: Lurch on October 03, 2013, 11:23:17 PM

Couldn't find it this evening ... can you post a link?
<edit> still looking ...

Title: Re: vga monitor on A20
Post by: progmetalbg on October 08, 2013, 10:07:42 PM

I checked the latest A20-OLinuXino manual (revision E from 02.10.2013) and on page 29 is written:

Quote6.10 VGA connector
You would probably need an adapter cable for the VGA display (6-pin connector to 15-pin female
RGB cable). Note that you also have to change the script under Debian as explained in chapter 2.6
"Calibrating a display". Olimex sells such a cable separately but you can make it yourself.

Still cannot find it though ...

Title: Re: vga monitor on A20
Post by: junetec on October 11, 2013, 12:49:04 PM

I don't find the connector in the shop.

Title: Re: vga monitor on A20
Post by: olimex on October 11, 2013, 03:42:31 PM

https://www.olimex.com/Products/Components/Cables/A20-VGA-CABLE/

Title: Re: vga monitor on A20
Post by: junetec on October 11, 2013, 07:36:10 PM

Thanks

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: gerard simonet on October 03, 2013, 09:45:11 AM