Print Page - Flashing Android image using LiveSuit 1.09

Title: Flashing Android image using LiveSuit 1.09
Post by: amarretta on August 06, 2013, 01:00:50 PM

Hi all,
I've bought A13 with NAND and WiFi.

by default it has flashed image for 800x600 display. I have a 800x480 display so I need to flash correct Android image.

I installed LiveSuit following link on Wiki page. I red instruction then I tried to flash downloaded image but I always get "Upgrade fails : 0x162".

I'm using an HP laptop running win7 64bit

What should I do?

[size=78%]Thanks[/size]

Title: Re: Flashing Android image using LiveSuit 1.09
Post by: amarretta on August 07, 2013, 12:15:05 PM

Am I the only one with this problem?

Please help me, actually I have an unusable board

Title: Re: Flashing Android image using LiveSuit 1.09
Post by: Lurch on August 07, 2013, 01:02:42 PM

Mine works fine, so I can't help there. There are some links - try Google. i.e:
http://www.tabletroms.com/forums/prestige-7/5771-error-livesuit-update-failed-0x162.html

Title: Re: Flashing Android image using LiveSuit 1.09
Post by: amarretta on August 07, 2013, 01:32:25 PM

Thanks Lurch

I red the thread at your link and I found what was my problem...

img file name...maybe too long?

I renamed "A13_android_NAND_LCD_800x480_EN_second_release.img" into "Original.img" and everything was fine at first attempt.

If I had known earlier..!!

Thank you

Title: Re: Flashing Android image using LiveSuit 1.09
Post by: Lurch on August 07, 2013, 01:56:32 PM

Glad it worked!
Good to know that the name length is a problem. Olimex often uses long names.

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A13 => Topic started by: amarretta on August 06, 2013, 01:00:50 PM