Print Page - RPI has burned

Title: RPI has burned
Post by: didis_be on July 04, 2013, 10:31:19 AM

Hi,

I have played a little bit with the MOD-IO (4 relay) and the RPI .. and yesterday at night, the RPI has burned :/ .. just when I connected the MOD on the RPI ... (via the GPIO/UEXT adapter)..

I don't understand ... The ARM CPU was becoming really hot .. then he die ..

And I have checked the cables, they was correctly plugged in the right sens ..

Someone have advices about how to connect the two together safely ?

Before that I burn the last RPI that I have ... :((((

Regards

Title: Re: RPI has burned
Post by: LubOlimex on July 12, 2013, 01:43:44 PM

Hey didis_be,

You didn't mentioned how you connected the boards. Did you use the ready adapter (https://www.olimex.com/Products/Modules/Adapters/RPi-UEXT/ (https://www.olimex.com/Products/Modules/Adapters/RPi-UEXT/))? Did you draw wires yourself?

Best regards,
Lub/OLIMEX

Title: Re: RPI has burned
Post by: didis_be on July 23, 2013, 11:49:43 AM

Quote from: LubOlimex on July 12, 2013, 01:43:44 PM
Hey didis_be,

You didn't mentioned how you connected the boards. Did you use the ready adapter (https://www.olimex.com/Products/Modules/Adapters/RPi-UEXT/ (https://www.olimex.com/Products/Modules/Adapters/RPi-UEXT/))? Did you draw wires yourself?

Best regards,
Lub/OLIMEX

Hi,

Yes .. I used this adapter.

Actually, I made some test with another RPI .. and it seems to work.

We will see.

Title: Re: RPI has burned
Post by: LubOlimex on July 23, 2013, 03:29:55 PM

Helllo didis_be,

Probably you have seen this, but I'll link it just in case you've missed it:

https://github.com/OLIMEX/raspberrypi (https://github.com/OLIMEX/raspberrypi)

There are few examples with other boards and RPI.

Best regards,
Lub/OLIMEX

Olimex Support Forum

Others => UEXT => Topic started by: didis_be on July 04, 2013, 10:31:19 AM