Print Page - How to power down the A13 so it does not corrupt Nadnd or the SD

Title: How to power down the A13 so it does not corrupt Nadnd or the SD
Post by: BJFreeman on March 23, 2013, 12:56:46 AM

Got my A13 and read the manual page 8, that said

Important!Avoid disconnecting th pow r supply whil Android or Linux is running,sinc that
might corrupt the operating syst m and you will ne d to install the OS again (for Android install
instructions check chapt r 2.6.Us the PWR_BUT before disconnecting the supply.

Now I found the button on the schematic but on the PCB DRW or board.

what have I missed?

as a result may have damaged the board.
I would like to not do this again to a new board.

Title: Re: How to power down the A13 so it does not corrupt Nadnd or the SD
Post by: BJFreeman on March 23, 2013, 05:51:24 PM

John pointed out the button is near the power Jack which I totally missed.
now I can bring my my new board :D

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A13 => Topic started by: BJFreeman on March 23, 2013, 12:56:46 AM