Hi,
We had planned to use Olimex Jtag/SWD solutions on NXP targets (LPC5410x / LPC82x for SWD support via OpenOCD).
According to the Olimex's manual, "ARM-USB-OCD-H" is the better choice for chain programming of target devices.
If the USART support on OCD-H is not MUST, which one is recommended for NXP targets?
BTW, according to OpenOCD's manual, the "lpc2000" flash driver already supported with LPC54100/LPC800 families.
If anyone here had successful experiences with OpenOCD SWD support on LPC(5410x/82x) targets, please give us some feedback.
Hopefully someone can point me in the right direction.
Thanks for all your kind help.