I'm building a cluster of A10s, but have run into a snag.
Can someone that has an assembled board shoot me the height of the assembled board?
Basically, from a flat floor to the top of the tallest component.
I saw a ton of dimensions for the board layout and such but none of the height.
Thanks!
I measured the Ethernet connector plus the SD card as these are the tallest components on each side.
Ethernet (includes the shielding connectors) is 14.8mm from the board.
SD card is 2.9mm from the board.
PCB is 1.6mm
Total = 19.3mm
Hope this helps.
Bear in mind heat and RFI / EMI.
John