The list I am planning to get: MOD-GSM-EDGE, UEXTx5, MOD-RFID1356-BOX (2x), A20-OLinuXino-LIME-4GB, A20-LIME-DEBIAN-SD, CABLE-IDC10-15cm (5x), A10-OLinuXino-LIME-UEXT, CABLE-40-40-10CM.
My question is basically, that do the MOD-RFID1356 modules work well with MOD-GSM-EDGE module, when used with the A10-OLinuXino-LIME-UEXT module + UEXTx5 divider. And does the list contain everything needed to connect all this together?
Do I also need got an adapter to connect it to 230V, or does the A20-OLinuXino-LIME-4GB come bundled with one?
Freel free to offer any additional suggestions if the selected components are not adequate.
You need a 5V Power Supply (e.g. SY0605E)
To be more specific, and since the RFID reader has changed from the boxed one.
I'm planning to use two MOD-RFID1356 (https://www.olimex.com/Products/Modules/RFID/MOD-RFID1356/)'s, and the MOD-GSM-EDGE (https://www.olimex.com/Products/Modules/RF/MOD-GSM-EDGE/) module to read tags and transmit the data to a server. Are there any compatibility issues with the two USB ports available, and the MOD-RFID1356 (https://www.olimex.com/Products/Modules/RFID/MOD-RFID1356/)? I'm assuming from the information available, that they will show up as normal USB HID devices, thus having hidraw0 and hidraw1 in /dev/.