A20-OLinuXino Allwinner DoubleCore Cortex-A7 1Ghz prototypes run Android 4.2.2 http://olimex.wordpress.com/2013/05/24/a20-olinuxino-dualcore-cortex-a7-prototypes-work-fine/
Very good news
when you can buy?
the developer edition will be ready for sale in few days
Will you provide Android SDK to developer? Otherwise we will wait for linux.
A20-OLinuXino-MICRO for the moment have Android 4.2.2 bootable image from both NAND and SD-card
Dimitar is working on Linux implementation and we will have Linux for NAND and SD-card in the next days
the A20-SDK is 4 GB and pretty useless unless you want to make your own Android image as it's as usuall with binary blobs for all interesting stuff
Are you planning to release a version with network support 1Gbit?
For example based on the chip Micrel KSZ9031RNX
for the moment we do not think for 1G Ethernet version neither for 2GB RAM :)
I'm very interested in this model. I'd like to know where can I get the bootloader files, the fex files, the kernel sources and the kernel .config to compile it propertly.
Also I'd like to know whether the SATA port is working propertly with the current kernel version.
for the moment we got A20-SDK which builds just Android 4.2.2
linux-sunxi have no uboot, no kernel etc support for A20
some boards will be mailed to linux-sunxi developers so they can add support to linux-sunxi project
meantime Dimitar Gamishev ran Linux on his A20-board (first protos we made last week) and now works on the different modules to make them work, using Allwinners uboot and kernel
the original Allwinner SDK have no support for SATA, Ethernet etc as they target tablets, so Dimitar now work to add these
I do not understand, the board has power switch button?
This is the version for developers, but it will be another version?
P.S. Very good project
Oh wonderful!! ;D I can't wait for linux on this board!!
Nice board. Slight problems on boot, but they were due to an undersized power supply. Bigger supply works fine.
A20 Android with 10" TFT doesn't recognize the on-board Ethernet, but a USB Ethernet plug-in is recognized and after selection in "settings" works OK. Is this normal?
the support is not completed, so yes, there are some glitches with the software
Allwinner Android SDK do not support wired Ethernet
Dimitar is working on Debian and Android images which support all peripherials
Hi Olimex,
I just received the A20 model. Do you know when prebuilt debian image will be released ?
Is it possible to use A13 image for the moment ?
there is preliminary image but it doesnt support all hardware features
At the moment, it would be OK just to have limited hardware.
It's just to investigate the board a little.
We don't want to take Dimitar away from his work ... just look over his shoulder ;-)
Ok, where can i find it ?
(i mean no trace frm the Wiki :D )
In order to use Logitech Unifying receivers, I would vote for the addition of
enable /dev/hidraw by setting --> CONFIG_HIDRAW
in the next release.
Very nice board - spoils the fun with A13.