Started by NachoV, February 18, 2021, 05:01:03 pm
Quote from: LubOlimex on February 19, 2021, 09:13:39 amHow long was it applied? If it was for more than a couple of seconds, some router setup hardware damage is expected. The main chip is probably operational but parts of the powering circuit would need to be replaced.Refer to the schematic and follow the path of power - starting from the power jack and moving towards the regulators.
Quote from: vtsvetkov on February 20, 2021, 05:13:50 pmWhen I did this exact same thing, it damaged the voltage regulator. After replacing it the board worked as before.