Hello, i would make my own bootable SD car for Olimex Lime 2.
I use the official topic: https://github.com/OLIMEX/OLINUXINO/tree/master/SOFTWARE/A20/A20-build
But step 3.2 :
------------------------------------------------------------------------------------------
Now you can continue with kernel image compiling
# make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j4 uImage
when this finish's you will have uImage ready and the result should be:
Kernel: arch/arm/boot/zImage is ready
UIMAGE arch/arm/boot/uImage
Image Name: Linux-3.4.90+
Created: Tue Aug 19 16:23:22 2014
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4596072 Bytes = 4488.35 kB = 4.38 MB
Load Address: 40008000
Entry Point: 40008000
Image arch/arm/boot/uImage is ready
----------------------------------------------------------------------------------------
I have this result:
(http://puu.sh/iIF06/f18e439d5e.png)
My image name is Linux-3.4.103+ not 3.4.90+. Yet i followed commands :-\ .
If anyone can help me
QuoteMy image name is Linux-3.4.103+ not 3.4.90+. Yet i followed commands
It is just a newer version, you did nothing wrong :) go on with it.
Okè!
But Step 7.
I take this?
7.1 for A20-OLinuXino_Lime2 board download the script.bin file using wget command
# wget https://github.com/OLIMEX/OLINUXINO/raw/master/SOFTWARE/A20/A20-build/scripts_a20_Lime2_34_90_camera_rel_2/script.bin
Because it's not 3.4.103+ :-\
And step 8 :
Download debian rootfs with the file name "debian_FS_34_90_camera_A20-olimex.tgz" , which is available
only as a torrent. You would need a torrent client for it (Azureus, uTorrent, qBittorrent, etc).
The link to the torrent file is:
https://www.olimex.com/wiki/images/2/29/Debian_FS_34_90_camera_A20-olimex.torrent
It's not good version too :s
QuoteIt's not good version too :s
again this is not relevant. just go on
So ok ^^
Hi to all!
I have the same problem. I need to build kernel module, but due to lack of headers in /usr/src i desided to cross compile. I followed instructions, but during kernel compilation got some errors about kernel modules. With this image my A20-Micro boots, but not working properly. So is where any download link to 3.4.90+ headers, or 3.4.90+ kernel sources?
Thanks in advance
UPD:
alex@alex-GA-MA790GP-DS4H:~/a20/linux-sunxi$ make ARCH=arm CROSS_COMPILE=/home/alex/MYIR/Sources/arm-2010q1/bin/arm-none-linux-gnueabi- -j4 INSTALL_MOD_PATH=out modules
*******
CC [M] drivers/usb/serial/whiteheat.o
CC [M] drivers/usb/serial/vivopay-serial.o
LD [M] drivers/usb/serial/usbserial.o
Building modules, stage 2.
MODPOST 1101 modules
WARNING: drivers/net/wireless/bcmdhd/bcmdhd: 'bcmsdh_probe' exported twice. Previous export was in drivers/net/wireless/bcm4330/bcm4330.ko
WARNING: drivers/net/wireless/bcmdhd/bcmdhd: 'bcmsdh_remove' exported twice. Previous export was in drivers/net/wireless/bcm4330/bcm4330.ko
ERROR: "__sync_fetch_and_and_4" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "__sync_fetch_and_or_4" [drivers/staging/line6/line6usb.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Das anyone have such errors during compilation?
This does not work, the two appears tux. Then appears a think that I can move the mouse with a black background
? :-\