Hi,
I need HDMI support only in an Android image. I have a few problems:
1. I didn't managed to switch off LCD screen. When I set screen0_output_type = 3 in a20-olinuxino_micro.fex file, I have pink screen on HDMI output
2. If I use LCD+HDMI, HDMI output works but a picture has black margins. I use a PC monitor without overscan settings
3. HDMI resolution is always 1080p. I didn't managed to change it to 720p as I need.
Can anyone help with these problems?
Your configuration of .fex file is wrong. Read http://linux-sunxi.org/Fex_Guide for success config.
Quote from: Anton_A on October 05, 2015, 02:15:02 PM
Your configuration of .fex file is wrong. Read http://linux-sunxi.org/Fex_Guide for success config.
I have tried different configurations based on http://linux-sunxi.org/Fex_Guide
According to http://linux-sunxi.org/Fex_Guide screen0_output_type: Output type for screen0: 3 - HDMI
What is wrong?
please, show your fex-file.
Quote from: Anton_A on October 05, 2015, 03:47:21 PM
please, show your fex-file.
I have tried this one https://github.com/linux-sunxi/sunxi-boards/blob/master/sys_config/a20/a20-olinuxino_micro.fex
Try fex-file for cubiertruck (% also you can try android for cubietruck and you can change fex-file with dragonface