Text only | Text with Images

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => iMX233 => Topic started by: ars102 on December 20, 2015, 07:33:00 AM

Title: New micro board, no power led when plug DC 5v
Post by: ars102 on December 20, 2015, 07:33:00 AM
Hello,
I just got a new Micro board from Olimex and tried to run BitBurner program 1st time. However, when I plug 5v DC power in, there is nothing happen, no any LED light-up and BitBurner program said no device. Pls help !

Thank you.
Title: Re: New micro board, no power led when plug DC 5v
Post by: JohnS on December 20, 2015, 08:21:13 PM
Isn't BitBurner for AVR from Windows?

John
Title: Re: New micro board, no power led when plug DC 5v
Post by: ars102 on December 21, 2015, 03:52:20 AM
I've checked again and actual it works already :-)

Basically, I plug 5c DC in, no SDCARD, USB-A type connects to PC running BitBurner and PC can recognize the board normally, but there is no any LED light-on in the board.
Title: Re: New micro board, no power led when plug DC 5v
Post by: Chris2048 on January 16, 2016, 04:38:12 PM
Had same issue, sort of o assumed I'd still see pwr led without SD-card, thought device was ded.
Put in sd with os, now the device boots, and power led shows. ++
Title: Re: New micro board, no power led when plug DC 5v
Post by: JohnS on January 16, 2016, 07:24:11 PM
I think there's only one LED and it's controlled by software (which won't be running).

John
Text only | Text with Images