LCD-OLinuXino-4.3TS - Open Source Hardware Board
LCD-OLinuXino-4.3TS - Open Source Hardware Board LCD-OLinuXino-4.3TS - Open Source Hardware Board
4.3 inch LCD screen with backlight and resistive touch screen panel, compatible with OLinuXino boards
Price35.00 EUR
10 - 49 pcs31.50 EUR
50 - 10000 pcs28.00 EUR
In stock

A 4.3" LCD display with a resistive touch screen component, compatible with Olimex A10, A13, A10s, A20 Allwinner development boards with either 0.1" or 0.05" LCD connector. Suitable for Linux and Android video output.


  • TFT Panel Features:
  • Construction: 4.3" color TFT-LCD, White LED Backlight and PCB.
  • Resolution (pixel): 480x272
  • Touch screen
  • Two interface connectors: both 40 pin 0.1" pitch and 40 pin 0.05" pitch
  • Power supply voltage: 5V external power jack or 40 pin LCD connector.
  • Note that the cable to connect to your board is sold separately


Please check the OLinuXino wiki articles which contain suitable Linux images for the 4.3" display.


  • I bought LCD-OLinuXino-4.3TS but there is no ready Android for it. Where can I find it?
  • The display is too small to be used with our latest Android releases. Please either use Debian or get a 7" or 10" inch display.
  • I bought LCD-OLinuXino-4.3TS but when I connect it to the A13-OLinuXino I receive no image on the display. What do I do wrong?
  • The default A13-OLinuXino image is set for a VGA display and 800x600 resolution. To use LCD with A13-OLinuXino you need to run a configuration script. More information might be found here:
  • I bought LCD-OLinuXino-4.3TS and the SD card that has Linux image written on it. However the resolution I see on my VGA/LCD is not correct. What am I missing?
  • You would need to run a configuraiton script as explained in the wiki article for the respective board