 *********************************** 
 * built date: 07 April 2010
 * by shondll
 ***********************************
 

 *** Project description ***
This is a very simple project for the LPC-P2919 board produced by Olimex Ltd. The board 
features LPC2919 ARM9 processor. When the demo is started LED1, LED2, LED3 start flashing in a
sequence with period about 0.5 seconds. The project is configured to run in the embedded RAM
memory of the device.

 *** Hardware Requirements ***
-- Demo board LPC-P2919 by Olimex
-- ARM-USB-OCD-H or ARM-USB-TINY-H ARM debbugger by Olimex

 *** Installation ***
The workspace is configured to work with an installation of Olimex USB-OCD-H rev_H. It is highly
recommended to keep the default installation directory ("C:\gccfd\"). This workspace directory 
"project_LPC2919" should be copied/moved in the installation directory (again "C:\gccfd\" if using
defaults).

If you haven't installed the JTAG debugger yet, please connect and install it using the 
drivers in the installation folder before moving on.

 *** Running the Demo ***
When you start Eclipse choose File->Switch Workspace->Other... and then select
the folder "project_LPC2919". 

Build the project (right click the project->Build Project).

Open the file "main.c" and with the editor window still active select
Run->External tools->(The name of your debugger). If the acive window is not the editor a popup
window will appear displaying an error!
If you have setup everything up to now sucessfully you should read something like this in the
console:
Info : JTAG tap: lpc2900.cpu tap/device found: 0x0596802b (mfg: 0x015, part: 0x5968, ver: 0x0)

You can now start the program by selecting: 
Run->Debug Configurations...->LPC2919_ram DEBUG and then press the Debug button in the lower right 
corner of the window.

Switch to Debug perspective and use the buttons for debugging above the editor window.

Enjoy ;)

