########################################################################
#
#                           uip_webserver.eww
#
# $Revision: 30465 $
#
########################################################################

DESCRIPTION
===========
   This example project should be used only with IAR Embedded Workbench for ARM
  This demo shows a web server  application  running on the top of the uIP 1.0
  TCP-IP stack. This example can work standalone on the Olimex LPC1766-STK board.


COMPATIBILITY
=============

   The example project is compatible with Olimex LPC1766-STK evaluation board.
   By default, the project is configured to use the J-Link JTAG interface.

   The default IP address is:
    192.168.0.100 (set in main.c main subroutine)
   The physical MAC address is (defined in uipopt.h):
    00-ff-ff-ff-ff-ff

CONFIGURATION
=============

   After power-up the controller get clock from internal RC oscillator that
  is unstable and may fail with J-Link auto detect. In this case adaptive
  clocking should be used. The adaptive clock can be select from menu:
  Project->Options..., section Debugger->J-Link/J-Trace  JTAG Speed - Adaptive.

   Make sure that the following jumpers are correctly configured on the
  Olimex LPC1766-STK evaluation board:

  PWR_SEL     - depending of power source
  RST_E       - unfilled
  ISP_E       - unfilled

GETTING STARTED
===============

  1) Start the IAR Embedded Workbench for ARM.

  2) Select File->Open->Workspace...
     Open the uip_webserver.eww workspace
     
  3) Run the program.

  4) Connect cable between PC LAN Card or Hub and Olimex LPC1766-STK board.
     Start web browser and type 192.168.0.100 in address field of the browser.


