SAM7-P64 DEVELOPMENT BOARD FOR AT91SAM7S64 ARM7TDMI-S MICROCONTROLLER

FEATURES:

• MCU: AT91SAM7S64 16/32 bit ARM7TDMI™ with 64K Bytes Program Flash, 16K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
• standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• USB connector
• Two channel RS232 interface and drivers
• SD/MMC card connector
• two buttons
• trimpot connected to ADC
• thermistor connected to ADC
• two status LEDs
• on board voltage regulator 3.3V with up to 800mA current
• single power supply: 6V AC or DC required
• power supply LED
• power supply filtering capacitor
• RESET circuit
• RESET button
• 18.432 Mhz crystal on socket
• extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
• Dimensions: 120 x 80 mm (4.7 x 3.15")

• SAM7-P64.chm
• How to program SAM7-P64
• Using Open Source Tools for AT91SAM7 Cross Development - Revision B guide by Jim Lynch

• SAM7-P64 schematic REV.E

• SAM7-P64 blinking LED project and binary code for SAM-BA load
• SAM7-P64 sample mouse driver project and binary code for SAM-BA load
• UART routines project
• SD/MMC read/write routines project
• button read, temperature measurement project
• MOD-SMB380 read demo code for EW-ARM 4.11 with SAM7-P64/256 board
• USB virtual COM port for GCC+OpenOCD+Eclipse
• OpenOCD + Eclipse set of projects 1.00 include flash write make file for SAM7-P64. The complete list of projects included is here.

ORDERING CODES:
		SAM7-P64 - assembled and tested board, includes AT91SAM7S64 microcontroller