PIC-LCD3310 - DEVELOPMENT BOARD WITH PIC18F67J50 3-AXIS ACCELEROMETER AND NOKIA3310 LCD DISPLAY

INTRODUCTION:

PIC-LCD3310 is development board with PIC18F67J50, NOKIA 3310 BW 84x48 pixels LCD, joystick, 3xis accelerometer. The board have SD-MMC connector and all PIC ports are available on two extension connectors. It's perfect for motion datalogging/analyze. The USB port allow logged data easily to be transfered to PC.

FEATURES:

• MCU: PIC18F67J50 with 128KB Flash memory, 3904B SRAM, 10-bit 8-channel ADC module, PWM, SPI, I2C, EUSART, 2 Analog comparators and 8/16-bit Timer/Counters
• ICSP connector for PIC-ICD2/PIC-ICD2-POCKET debugger/programmer
• LCD NOKIA 3310 black/white 84x48 pixels
• Two status LEDs
• Joystick with LEFT, RIGHT, UP, DOWN and CENTER action
• mini USB connector
• SD/MMC card connector
• MMA7260 accelerometer
• Extension connectors for all PIC ports
• +(4.5–6.0) battery connector
• PCB: FR-4, 1.5 mm (0,062''), soldermask, silkscreen component print
• Dimensions 65x65 mm (2.56 x 2.56")
  

• PIC-LCD-3310.pdf - Users Manual

• PIC-LCD-3310 REV.A schematic
• PIC ICSP connector

• Blinking LED (C source and HEX)
• LCD demo (C source and HEX)
• SD-MMC card read/write (C source and HEX)
• Accelerometer read demo code (C source and HEX)
• LED buttons read (C source and HEX)
• GPS compass with MOD-GPS and PIC-LCD3310 (C source and HEX)
• GPS SD-MMC card logger software with MOD-GPS and PIC-LCD3310 (C source and HEX) in progress
• GPS homing device with MOD-GPS and PIC-LCD3310 (C source and HEX) in progress
• GSP trace route recorder / player with with MOD-GPS and PIC-LCD3310 (C source and HEX) in progress
• GPS perimeter area break alarm device with MOD-GPS and PIC-LCD3310 (C source and HEX) in progress

ORDERING CODES:
		PIC-LCD3310 Completely assembled and tested