DESCTIPTION: Prototype board for MSP430F1121 microcontrollers with power supply circuit, crystal oscillator circuit, JTAG port.

• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• JTAG connector
• JTAG Power_In and Power_Out jumpers
• TEST pin pull-down
• RST/NMI pin pull-up
• LED connected to P1.0 via jumper
• Voltage regulator +3.3V/1A and filtering capacitors
• 32 768 Hz crystall oscilator
• Extension slot on every uC pin
• Grid 100 mils
• four mounting holes
• GND bus
• Vcc bus

SUPPORTED DEVICES: MSP430F1121
DIMENSIONS: 100x80 mm (3,9x3,15")
HARDWARE: Schematic, MSP JTAG connector (top view)
DOCUMENTS: msp430-p1121-e.pdf
SOFTWARE: msp430-p1121.asm test software with LED blink

ORDERING CODES:
		MSP430-P1121 Fully assembled and tested with MSP430F1121A microcontroller